Corrosion-resistant, long-lasting finishes for steel pipes, box profiles, panel fencing and wire mesh — engineered solutions with continuous-conveyor powder coating lines or wet paint systems for oversized parts.
From pipe powder coating lines to panel fence coating plants, and from box profile powder coating machines to fence wire coating equipment, every part type needs consistent finishes that withstand corrosion, weather and mechanical wear. STRONG3000 engineers the application, automation and curing technology.
From functional corrosion coatings to duplex galvanizing + powder systems, we tailor the process to every part type.
Pipe and profile parts must be coated at high efficiency on a continuous line and repeatably despite variations in cross-section and length. Below we summarize how we approach each part type; powder coating or wet (liquid) paint is selected according to material, geometry and service conditions. You can download part-specific technical datasheets (PDF) for the detailed engineering approach.
A uniform all-round film on the cylindrical surface and edge coverage at pipe ends are required on a continuous line; high-efficiency coating with polyester powder resistant to outdoor corrosion.
Request Details & a Quote
The Faraday cage effect causes low film build at corner radii and inside corners; current limiting and a tuned gun recipe give fully covered, corrosion-resistant powder coating on box profiles.
Request Details & a Quote
Numerous welded joints and inside corners create Faraday effect; robotic/manual application and conversion coating for an outdoor-durable, decorative powder finish.
Request Details & a Quote
Back-side coverage through wrap-around on thin wire geometry and adhesion over galvanizing are critical; a duplex (galvanizing + polyester powder) system for long-lasting panel fencing.
Request Details & a Quote
Airless wet paint for long/heavy profiles that do not fit in ovens; a zinc-rich epoxy + polyurethane multi-coat system with stripe coating at welds and edges for a film that meets the required corrosivity class.
Request Details & a Quote
Faraday effect in the internal channels of complex extrusion sections and rapid heating of thin walls are the challenges; chrome-free pretreatment + QUALICOAT-grade polyester for architectural exterior facade durability.
Request Details & a QuoteContinuous-conveyor system; corrosion-resistant, high-efficiency coating for pipes, box profiles, panel fencing and wire mesh.
Airless wet paint application systems for long or large structural profiles that do not fit in ovens.
Reciprocators, robotic application and overhead conveyor systems for consistent, high-volume pipe and profile production.
Complete finishing plants engineered around your pipe and profile production targets — from pretreatment to oven.
Adaptive control and process monitoring for repeatable results across a wide variety of pipes and profiles.
Pipe powder coating lines, panel fence coating plants, fence wire coating equipment and oversized structural profiles — part sizes vary over a wide range. Continuous-conveyor powder coating lines process standard parts at high efficiency, while profiles that do not fit in ovens are coated with a wet paint system. STRONG3000 offers both processes from a single engineering partner.
Selected projects from STRONG3000 plants in operation.
Automatic line-type wet enamel plant for the inside and outside of valves and pipes. Filtered, stackless application booths.
Electrostatic powder coating application booth for range hood and extractor covers.
Sintering (enamel) furnace, washing and drying line for enameling plants.
Aluminum extrusion profile powder coating lines; QUALICOAT-grade coating and chrome-free pretreatment.
Automatic powder coating booths, cyclone recovery and complete powder coating plant solutions.
Enclosure powder coating plants, box-type powder coating ovens and sheet metal coating lines.
Combined KTL + powder coating lines for heavy construction machinery and agricultural equipment.
Tell us about your part, line capacity and part geometry — we'll recommend the right configuration, from continuous-conveyor powder coating lines to oversized wet paint systems.
Tell us about your pipe or profile part and volume. A STRONG3000 engineer will get back to you with a recommended process.