Powder Coating Ovens
Uniform Cure. High Efficiency.
STRONG3000 Powder Coating Ovens cure and polymerize the organic resin of the applied powder coating at approximately 160–200°C. Engineered for uniform temperature distribution and low energy consumption, they deliver a durable, repeatable coating film.
Controlled Heat for Organic Curing.
Powder coating curing ovens melt the electrostatically applied powder film so it flows out, then cross-link (polymerize) it to a hard finish. This typically happens at ~160–200°C over a process-matched dwell time, where temperature uniformity directly determines the final film quality.
Available with gas or electric heating, the ovens use an insulated enclosure and controlled air circulation to hold uniform temperature across the entire working volume. They pair with STRONG3000 booths, application equipment and conveyor systems as part of a coordinated line.
From the Booth, Cured in the Oven.
- Entering the ovenParts coated with powder leave the booth and enter the oven on the conveyor. The entry opening is shaped to the part silhouette; the smaller the opening, the lower the heat loss.
- Heating and meltingCirculated hot air heats the part; the powder melts, flows and forms an even film on the surface.
- CuringThe part stays in the oven at the temperature and time specified by the powder manufacturer (typically ~160–200 °C); the resin cross-links and hardens.
- Exit and coolingCured parts leave the oven and, depending on the line layout, pass through a cooling zone to the unloading station.
Conveyor speed and oven temperature are set from the PLC touch screen; the curing profile is set according to the part and the powder type.
Footage from an Installed Line.
From a running STRONG3000 line: the oven entry cut to the part silhouette, and parts moving through the oven on the conveyor.
Consistent Curing.
Uniform Temperature
Even heat across the working volume for consistent polymerization.
High Thermal Efficiency
Low energy loss thanks to the insulated body and controlled circulation.
Precise Temperature Control
Stable, repeatable curing profile across the ~160–200°C range.
Flexible Heat Source
Gas or electric heating to suit your plant infrastructure.
Powder Coating Ovens — Technical Specifications.
Values are typical ranges; final values are confirmed per project by STRONG3000 engineering.
| Operating temperature | 160 – 220 °C |
|---|---|
| Temperature uniformity | ± 3 – 5 °C |
| Heating | Natural gas / LPG / electric |
| Insulation | 100 – 150 mm rock wool |
| Type | Box / conveyorised / U-type |
| Control | PLC + touchscreen, data logging |
Technical Datasheet & Documents.
PDF · All the technical content of this page
Real Lines. Real Work.
See our equipment running in our showroom and on our production line. Book a visit — our team will host you at our facility for a live demo, sample application and line planning.
Planning Your Curing Capacity?
Tell us about your part, volume and line — we'll recommend the right oven configuration.