Box Ovens
Flexible Batch Production. Powder and Enamel.
Box Ovens provide flexible batch curing for varied and low-to-mid volume production. Engineered both as box-type powder curing ovens (160–220 °C) and box-type powder enamel firing ovens (780–850 °C).
Flexibility for Varied Production.
Box (batch) ovens process parts loaded in batches through a single curing cycle. Because they operate in discrete cycles rather than a continuous conveyor flow, they are ideal for different part sizes, geometries and low-series production runs.
Curing temperature is set to the process — typically the ~160–200°C range for powder coating. An insulated enclosure and controlled air circulation maintain uniform temperature across the whole batch.
Batch Flexibility.
Process Flexibility
Adapts to different part sizes and curing cycles.
Uniform Temperature
Even heat across the batch through controlled circulation.
Suited to Low Volumes
Economical solution for varied and low-series production.
Floor-Level Loading
The oven floor is level with your factory floor, so parts load easily by trolley.
Take a Closer Look.
Box Ovens — Technical Specifications.
Oven dimensions are engineered to your largest part and your plant.
| Oven Type | Box / batch |
|---|---|
| Operating Mode | Batch loading |
| Maximum Temperature | Powder coating: 220 °C · Powder enamel: 850 °C |
| Temperature Control | Digital thermostat and PLC panel; for powder enamel, recipe-based heating, holding and cooling on a touchscreen |
| Chamber Dimensions | Engineered to the largest part and the ceiling height |
| Capacity | Set by batch size and cycle time |
| Heat Source | Powder coating: burner-fired, stainless steel combustion chamber (heat exchanger) · Powder enamel: per project |
| Insulation | Powder coating: 150 mm high-density rock wool and glass wool panels · Powder enamel: ceramic fibre blankets and refractory brick |
| Door and Loading | Manual or automatic trolley at floor level; pneumatic or motorized guillotine door for powder enamel |
Technical Datasheet & Documents.
PDF · All the technical content of this page
Planning Varied Production?
Tell us about your part, volume and process — we'll recommend the right batch oven configuration.