Elite Plus
Professional Control. Simplified.
Elite Plus brings touchscreen control to professional powder application — an approachable interface with recipe storage for repeatable setup, designed to make advanced parameter control easy on the production floor.
Advanced Control, Made Approachable.
Elite Plus puts professional powder coating parameters behind a clear touchscreen interface, so operators can set up and repeat coatings reliably without deep specialist training.
It stores recipes for consistent setup and pairs with STRONG3000 guns and booths as part of a coordinated line.
Control You Can Repeat.
Touchscreen Interface
Clear, guided operator control on the floor.
Recipe Storage
Store and recall settings for repeatable setup.
Simple Operation
Reduces the expertise needed for advanced control.
System Compatible
Works with STRONG3000 guns and booths.
Control Voltage and Current Separately.
As on all STRONG3000 control units, on Elite Plus kV (voltage) and µA (current) are set independently of each other. This lets you tailor electrostatic behavior precisely to each part geometry — you are never stuck with a single shared setting. Values are limited in line with ATEX norms: kV max. 100, µA max. 120.
kV — Voltage
The strength of the electrostatic field controls how the powder is charged and attracted to the part. High efficiency on flat, wide surfaces.
µA — Current
Limits the ionization current; manages back-ionization. Deeper penetration into recesses, corners and Faraday cage areas.
Setting both independently delivers efficiency on flat surfaces and penetration into recesses/corners at the same time — less waste, uniform film and repeatable results.
Knowledge Center: Why Set kV & µA Separately?
4070100%40%Elite Plus — Technical Specifications.
Values are typical ranges; final values are confirmed per project by STRONG3000 engineering.
| Output voltage | 0 – 100 kV fine adjustment |
|---|---|
| Recipes | 50 programs |
| Variants | Hopper / Multicolor |
| Interface | 4.3" touchscreen |
| Design | Compliant with EN 50050-2 requirements |
From Powder to Finished Part.
Feeding
Powder is fed from a hopper or box by a venturi injector.
Electrostatic Charging
Corona charging with fine 0–100 kV adjustment.
Touch Control
50 recipes and precise parameter adjustment on the 4.3" screen.
Application & Recovery
The part is coated; excess powder is recovered.
Choose Your Setup.
Elite Plus Hopper
Precise manual application with a fluidized-bed hopper.
Elite Plus Multicolor
Direct feeding from the box for frequent color changes.
Part of the STRONG3000 System.
- Venturi Injector — precise powder feeding
- PVC / Steel Monocyclone Booths — application & recovery
- Powder Center & Ultrasonic Sieve — consistent powder quality
- Reciprocators & Robotics — automated motion
- Curing & Firing Ovens — line integration
Built to Standards.
STRONG3000 Elite Plus holds ATEX and CE documentation. You can download the documents below.
Documentation.
PDF · All the technical content of this page
Durable Engineering Plastics.
Across all our manual series — Elite, Elite Plus, Smart and Smart AI — the carts, hopper and multicolor models are made of antistatic, easy-to-clean and durable engineering plastics.
A Gun for Every Job.
All guns work with Smart, Elite and Smart AI control units. Manual guns are not used on automatic units.
Manual Guns · 3 Types
Powder Coating Guns · 3 Lengths
Powder Enamel Guns · 2 Lengths
Complete the System.
Control Unit Comparison.
Feature comparison of the Elite, Elite Plus, Smart and Smart AI control units.
- Standard Air Regulator with Pressure Gauge
- Current and voltage independently adjustable
- 100 kV & 120 µA ATEX safety limit
- 1 product recipe memory
- LED indicator panel
- Language support
- Modbus & RS485 communication
- Gun-mounted control button
- Wi-Fi & remote software updates
- OWL & AI integration
- Spare part lifetime notifications
- Precision Digital Air Regulator
- Current and voltage independently adjustable
- 100 kV & 120 µA ATEX safety limit
- 10 product recipe memory
- 7-inch impact- and static-resistant display
- Language support
- Modbus & RS485 communication
- Gun-mounted control button
- Wi-Fi & remote software updates
- OWL & AI integration
- Spare part lifetime notifications
- Precision Digital Air Regulator
- Current and voltage independently adjustable
- 100 kV & 120 µA ATEX safety limit
- 10 product recipe memory
- 7-inch impact- and static-resistant display
- Language support
- Modbus & RS485 communication
- Gun-mounted control button
- Wi-Fi & remote software updates
- OWL & AI integration
- Spare part lifetime notifications
- Precision Digital Air Regulator with Flow Control Sensor
- Current and voltage independently adjustable
- 100 kV & 120 µA ATEX safety limit
- 60 product recipe memory
- 7-inch impact/static-resistant display with protective cover
- 12-language support (English, Russian, Chinese…)
- Modbus & RS485 communication
- Gun-mounted control button
- Wi-Fi & remote software updates
- OWL & AI integration
- Spare part lifetime notifications
Frequently Asked Questions.
Yes. The control unit can be upgraded to Smart / Smart AI while keeping the gun and feed equipment.
Fill in the Request a Quote form; we'll configure it for your application.
Real Lines. Real Work.
See our equipment running in our showroom and on our production line. Book a visit — our team will host you at our facility for a live demo, sample application and line planning.
Upgrading Your Control?
Tell us about your line — we'll recommend the right Elite Plus configuration.