We have installed more than 2000 plants to date. On this page you will find a selection of powder coating lines, powder enamel and wet enamel plants, ovens and pretreatment systems. The STRONG3000 equipment used in each project is listed at the bottom of its card.
An enameling booth for cavity (oven cavity) parts. Parts enter the STRONG3000 booth on an overhead conveyor; two-axis tracking reciprocators lined up along the booth carry the guns and follow the part along with the conveyor during application.
The customer's existing old booth was renovated by STRONG3000. The booth works on the plant's overhead conveyor line.
Long profiles pass through the booth on an overhead conveyor and are coated with yellow powder. A cyclone stands beside the booth.
Decorative sheet-metal parts enter the booth on an overhead conveyor and are coated with red powder.
Burner-fired box-type powder curing ovens for batch production. Parts are moved into the oven on an overhead rail system; the burner unit sits beside the oven body.
An enamel line for sheet-metal panels. The line includes a washing line, a drying line, stainless enamel booths and a U-type enamel firing furnace. Parts are carried along the line on an overhead conveyor.
Two-axis reciprocators moving on a rail base beside the booth carry the guns into the booth.
Cavity (oven cavity) and flat parts are carried to the stainless booths on an overhead conveyor and enamel coated.
An application area made up of a powder center and a booth with an operator platform. A work platform with stairs for the operator sits at the booth entrance.
Ribbed elbow parts pass through the booth on an overhead conveyor and are coated with grey and beige powder enamel by automatic guns.
Stove pipes pass through the booth on an overhead conveyor; automatic guns coat both their inner and outer surfaces with grey and beige powder enamel.
A booth built in PVC for powder enamel application. Parts pass through the booth on an overhead conveyor; application is done by automatic guns inside the booth.
Perforated steel profiles are powder coated in black and blue by automatic guns in the booth. Powder is fed to the guns by injectors.
Wire mesh panels and tubular frames are coated with green powder by automatic guns in the booth.
A powder coating line with pretreatment for large sheet-metal panels. Parts travel on an overhead conveyor through a spray washing tunnel, then are coated in a booth with an operator platform.
Many automatic guns placed on both sides of the booth coat the parts passing through on an overhead conveyor.
Large sheet-metal frames pass through the booth on an overhead conveyor and are powder coated by automatic guns.
A step-by-step (intermittent) enamel firing furnace for cylindrical parts. The overhead carrier moves in stops rather than continuously: parts enter the furnace on hangers, the sliding door closes, and the parts leave the furnace once the firing time is complete. The refractory-insulated chamber is heated by heating elements.
An electrostatic powder enamel coating plant with a climate room for cavity (oven interior) parts.
Electrostatic powder coating application booth for range hood and extractor covers.
Automatic line-type wet enamel plant for the inside and outside of valves and pipes. Filtered, stackless application booths.
Enamel coating line with overhead conveyor for cooktop burner caps.
Electrostatic powder enamel coating plant for cavity (oven interior) parts.
Automated enamel application and material handling plant for flat parts.
Wet enamel coating plant for grates and pots/pans, including a U-type enamel application booth.
Electrostatic powder enamel coating and continuous conveying line for flat sheet-metal parts.
Powder enamel coating plant for cavity parts. Client details are kept confidential.
Sintering (enamel) furnace, washing and drying line for enameling plants.
Enamel coating line with overhead conveyor for cake / bundt molds.
A powder enamel coating plant project for cavity parts.
This page shows only part of our 2000+ projects. Contact us for more references that match your industry and parts.
Tell us about your part and volume — we'll recommend the right process and line.
Tell us about your part, capacity and process. A STRONG3000 engineer will get back to you with a tailored proposal.