An Enamel Booth Built for Your Part.
From oven cavities to burner caps, flat parts and stove pipes — our powder enamel booths are engineered to the part geometry, with materials resistant to abrasive enamel powder and efficient recovery.
Powder enamel application demands a different booth architecture for each part: internal surface access for oven cavities, serial cycles for burner caps, axial coating for pipes, and line-type flow for flat parts and stove bodies.
With stainless construction suited to the abrasiveness of enamel powder, OWL and automatic gun integration, and efficient recovery, every booth is engineered as part of a STRONG3000 enamel line.
Booth systems built to suit the part in our turnkey powder enamel lines.
An automatic powder enamel system for deep parts such as oven cavities. Parts pass through the booth on an overhead conveyor while automatic gun reciprocators apply the enamel.
An automatic powder enamel system for flat parts such as panels and sheets. The booth is sized to the part dimensions and line speed.
A system that applies powder enamel to the inside and outside surfaces of pipes. The pipes hang vertically on the conveyor as they pass through the booth, and automatic gun reciprocators apply the enamel.
An automatic powder enamel plant with a rotary table for cooktop burner caps. The caps are coated on the rotary table by automatic guns.
An automatic powder enamel plant for boiler and water heater tanks. The lance gun enters the tank through the bottom flange; excess powder is extracted from inside the tank and recovered.
A powder enamel system that applies more than one color in a single booth via a color center. The standard build has 4 colors; it can optionally be built for 2 or 3 colors.
Dedicated architectures for cavities, burner caps, flat parts, pipes and stove bodies.
Stainless construction suited to the abrasiveness of enamel powder.
Intelligent motion gun and robot integration.
Sieving and recovery integration suited to enamel.
Values are typical ranges; final values are confirmed per project by STRONG3000 engineering.
| Booth types | Cavity / burner cap / flat part / pipe / stove |
|---|---|
| Body | Stainless — resistant to abrasive enamel powder |
| Application | OWL & automatic enamel guns |
| Recovery | Sieving integration suited to enamel |
| Film control | Verification by micron measurement |
See our equipment running in our showroom and on our production line. Book a visit — our team will host you at our facility for a live demo, sample application and line planning.
Tell us about your part and capacity — we'll recommend the right booth architecture.
Tell us about your part, capacity and process. A STRONG3000 engineer will get back to you with a tailored proposal.
